Hosts
The IOL RI2 pod is currently deployed across 6 hosts. Five hosts (hpe12, hpe29, hpe27, hpe31, and hpe07) make up the k8s deploy, with an additional sixth node as the jumphost (hpe30).
HPE x86_64 node:
| Memory | Capacity | 512 GB |
| Technology | DDR4 | |
| Network Interface Type 1 | Count | 4 |
| Speed | 25Gbit | |
| Model | ||
| Network Interface Type 2 | Count | 2 |
| Speed | 10Gbit | |
| Model | ||
| CPU | Socket count | 2 |
| Cores/Socket | 22 | |
| Threads/Core | 2 | |
| Model | ||
| Disk Type 1 | Capacity | ~1TiB |
| Count | 3 | |
| Interface | SATA 3 | |
| Storage Type | SSD | |
| RAID | None | |
| Disk Type 2 | Capacity | ~800GiB |
| Count | 1 | |
| Interface | SATA 3 | |
| RAID | 1 (two 480GiB members) | |
| Storage Type | SSD | |
| Feature Support | RedFish | |
| IPMI | Yes |
Networking
The pod has 7 layer 3 networks:
| Name | DHCP Provided | Subnet | Gateway | Netmask | Underlay VLAN |
|---|---|---|---|---|---|
| public | yes | 10.200.120.0 | 10.200.120.1 | 24 | 120 |
| oob | yes | 10.200.122.0 | N/A | 24 | 122 |
| mgmt | yes | 10.200.123.0 | 10.200.123.1 | 24 | 123 |
| private_1 | no | 127.0.101.0 | N/A | 24 | 201 |
| private_2 | no | 127.0.102.0 | N/A | 24 | 202 |
| private_3 | no | 127.0.103.0 | N/A | 24 | 203 |
| private_4 | no | 127.0.104.0 | N/A | 24 | 200 |
The jumphost has the following connections by interface name:
| Interface | Network | Handles Default Route | IP |
|---|---|---|---|
| ens1f0 | mgmt | yes | 10.200.123.11 |
| ens1f1 | oob | no | 10.200.122.16 |
Each host is connected to networks as follows:
| Interface | Network | Handles Default Route | IP |
|---|---|---|---|
| ens1f0 | oob | no | <subnet>.<node # + 10> |
| ens1f1 | public | yes | <subnet>.<node # + 10> |
| eno49 | private_2 | no | <subnet>.<node # + 10> |
| eno50 | private_3 | no | <subnet>.<node # + 10> |
| ens4f0 | private_4 | no | <subnet>.<node # + 10> |
- Update topology, integrate with draft PDF/IDF
Validated descriptor files PDF and IDF might help recognize the network topology we need. They are defined under hw_config/intel as YAML schema and can be used to refer to. The code can be found at https://gerrit.opnfv.org/gerrit/admin/repos/kuberef .
OS Environment
OS is wiped away by kuberef (baremetal deploy), jumphost can be Ubuntu or CentOS
- Find OS variant+version for jumphost
- Access/permissioning for jumphost: keys/accounts for all involved parties (add each as points below this)
PDF/IDF
The current IDF and PDF for the pod are idf.yaml and pdf.yaml.
Generation Scripts
A series of scripts were created to generate configuration files and the PDF/IDF pair for the pod. These files are available in the kuberef repository at <awaiting PR>.
The versions used to create the current deployment of the pod are attached to this page as install.py and gen_net_configs.py